STEEM POWER retention ratio of top 50 witnesses

by joviansummer original STEEMIT post: https://steemit.com/blog/@joviansummer/steem-power-retention-ratio-of-top-50-witnesses Hello, this is @joviansummer(witness: @jswit). Some time ago there was a bit of discussion on discord witness chanel about witnesses' power-down/cashing-out. So out of curiosity I just checked current ratio of witnesses' own STEEM POWER(VESTS) and all-time producer reward(VESTS). The ratio is calculated by the following simple formula: ratio(%) = account's own SP(MV) / all-time producer reward SP(MV) * 100% Ratio value less than 100% indicates power-down. If witness does additional power-up or gets other types of reward(e.g., curation reward), the ratio may exceed 100%. This does not take witness' other accounts into consideration. All-time producer reward data is from @steemchiller's SDS API. Here is the result: rank account own_sp prod_sp ratio 1 justyy 2188.411MV 1284.2MV 170.41% 2 steemchiller 982.134MV 124...

파이썬에서 리스트/딕셔너리 복사

by joviansummer
original STEEMIT post: https://steemit.com/blog/@joviansummer/cfchw


파이썬의 리스트(list)와 딕셔너리(dict)는 등호(=)를 이용해서 다른 변수에 할당할 경우 해당 자료가 복사되지 않고 동일한 데이터에 연결됩니다. 아래의 리스트 예시를 보겠습니다.

x = [1, 2, 3]
y = x

위와 같이 한 상태에서 y의 마지막 원소를 꺼내기 위해 pop()을 사용해 봅니다.

y.pop()

이렇게 하면 x와 y가 동일한 데이터에 연결되어 있기 때문에 x를 출력해도 마지막 원소가 제거된 것을 볼 수 있습니다.

print(x)

[1, 2]

데이터를 복사하여 별도의 리스트를 만들고 싶다면 아래와 같이 copy() 함수를 이용해야 합니다.

y = x.copy()

이렇게 하면 y에서 pop()을 사용해도 x에 저장된 데이터에는 변화가 없습니다.

딕셔너리도 마찬가지입니다. 데이터 자체를 복사해서 하나 더 만들고 싶다면 copy()를 사용합니다.

a = {'name':'john', 'age':20}
b = a.copy()

@joviansummer의 스팀 프로젝트

스팀 증인노드를 운영중입니다. @jswit에 증인투표해 주시면 감사하겠습니다.
(https://steemitwallet.com/~witnesses)

jswit 증인 노드 프로젝트를 시작합니다.

jsup 업보팅(upvoting) 서비스 소개

jsup 수혜자 지정 기능 추가

jSTEEM 프로젝트 - 텔레그램 챗봇으로 구현하는 스팀 블럭체인 탐색기

STEEM.NFT - 디지털 아트 보존 프로젝트

Comments

Popular posts from this blog

스티미언의 영향력 지수 계산

jsup/avle code update - you don't have to write post everyday

jsup/avle 보팅 코드 갱신 - 1일1포스팅 강박에서 벗어나기